Complete Electrical Services
for the Fraser Valley

A residential electrical panel upgrade in Chilliwack typically costs between $1,800 and $4,500, depending on the scope of work required. A straightforward 100A-to-200A panel swap with no additional circuit modifications generally ranges from $1,800–$2,800. If your home needs a service mast replacement, meter base upgrade, grounding system updates, or extensive rewiring to meet the current Canadian Electrical Code (CEC), the total can reach $3,500–$4,500. CN Electrical provides a free, detailed written quote before any work begins — no hidden fees or surprise add-ons. We also handle the Technical Safety BC permit and inspection coordination so your upgrade is fully compliant and documented.

Yes — almost all electrical work in BC requires a permit from Technical Safety BC, as mandated by the BC Safety Standards Act. This includes panel upgrades, new circuit installations, hot tub and EV charger hookups, basement suite wiring, and any alteration to your home's electrical system. The only exemptions are minor repairs like replacing a broken switch, light fixture, or receptacle on an existing circuit — and even then, the work must be done to CEC standards. Hiring a licensed electrical contractor like CN Electrical ensures your permit is filed correctly, the work passes inspection, and you receive a Certificate of Compliance. Unpermitted electrical work can void your home insurance and complicate a future home sale, as buyers and inspectors increasingly ask for permit records.

A Level 2 home EV charger installation in Chilliwack typically costs between $900 and $2,500. The price depends on three main factors: the charger unit you choose (ranging from $500–$900 for quality units like Grizzl-E, ChargePoint, or Tesla Wall Connector), the distance from your electrical panel to the installation location (longer cable runs cost more in materials and labor), and whether your existing panel has spare capacity. If your panel is full or near capacity, you may need a panel upgrade or a load management device, which adds to the cost. CN Electrical provides a free on-site assessment: we check your panel capacity, measure the cable run, confirm your charger placement, and deliver a firm written quote. We handle the BC Hydro load notification, permit, and inspection — so your installation is safe, code-compliant, and eligible for any available rebates.

If part of your home has lost power but the rest is fine, check these steps in order: (1) Check all GFCI receptacles — press the 'Reset' button on every GFCI outlet in the affected area, including bathrooms, kitchens, and exterior outlets. A tripped GFCI on one outlet can cut power to everything downstream on the same circuit. (2) Check your electrical panel for a tripped breaker — a breaker that looks slightly out of line with the others or is in a middle position. Turn it fully OFF, then ON to reset it. (3) If neither fixes the issue, you may have a loose connection, a failed breaker, or a damaged wire — all of which require a licensed electrician. CN Electrical provides prompt electrical troubleshooting in Chilliwack and the Fraser Valley. Call 1-604-798-1847 and we'll dispatch a licensed electrician to diagnose and repair the issue safely.

Aluminum branch circuit wiring, found in many homes built between the mid-1960s and late 1970s, is not inherently dangerous — but it does require specific remediation to meet modern safety standards. Aluminum expands and contracts more than copper with temperature changes, which can cause connections to loosen at receptacles, switches, and junction boxes over time. Loose connections create resistance and heat, which is a fire hazard. The two CEC-approved remediation methods are: (1) pigtailing copper conductors to the aluminum wiring at every device using UL-listed COPALUM crimps or AlumiConn mechanical connectors, or (2) a complete home rewire to copper. Many home insurance providers now require proof of aluminum wiring remediation before issuing or renewing policies. CN Electrical can inspect your home's wiring and recommend the safest, most cost-effective path to compliance.

Your home likely needs a service upgrade from 100A (or 60A) to 200A if you experience any of these signs: (1) your breakers trip frequently, especially when you run multiple appliances at once; (2) your lights flicker or dim when major appliances like the dryer, air conditioner, or heat pump kick on; (3) you're planning to add a basement suite, EV charger, hot tub, or heat pump — all of which significantly increase your electrical load; (4) your panel is warm to the touch or you hear buzzing from the panel or outlets; (5) your panel is a discontinued brand known for safety issues, like Federal Pacific or Zinsco. CN Electrical can perform a load calculation — a standardized assessment of your home's total electrical demand — to determine whether your existing service can handle your current and planned usage. If you need an upgrade, we provide a complete quote including panel, service entrance cable, meter base, mast (if required), and Technical Safety BC permit.